B-I-N® is the
original shellac-based white-pigmented primer-sealer stain-killer. Can
be used on all interior surfaces & spot priming exterior surfaces.
It is formulated to seal, prime and block out stains on previously
painted or new work. Any oil or latex paint can be applied over it.
 Seals new wood, wall-board, cured
plaster, all porous surfaces
Adheres to hard-to-stick-to
materials
Blocks out stains - water marks,
knots & sap, smoke & soot, graffiti, grease, crayon
Provides interior vapor barrier
Dries fast; lets you top coat in 45
minutes
B-I-N®
seals surface pores so you use less finish paint. Finish coat
has rich uniform appearance, with no "high" and
"low" spots. Finish resists dirt better and has better
scrubbability. One coat of B-I-N® kills - that is, covers and
locks in even the worst stains that bleed through multiple coats
of paint. With B-I-N®, there is no bleed-through into the top
coat to ruin the job.
B-I-N® adheres tenaciously to all dense, smooth and slick
surfaces such as: dense hardboard, chipboard, glass, Formica® ,
ceramic tile, PVC & metal pipes, radiators, grillwork, fire
doors, and galvanized ductwork. No sanding or etching or
deglossing agents are needed to get a firm bond. B-I-N®
provides an "anchor" for the top coat so it can't be
chipped or scraped off easily.
Whatever horrible paint or wallcovering may have been used
before, you can make a new start with B-I-N®. One coat will
transform the grimmest, darkest colors into a flat white ready
for new finish paint or wallcovering.
|
